Right Angle Clamping Jig
Free Download Link Below
This clamping jig is an easy, but very handy project for your shop.
I would suggest using 3/4″ plywood, ideally the factory corner of a scrap piece.
The corners and the miter angle can all be done with a jig saw, a miter saw, or your table saw with the a miter sled or straight-edge sled.
The clamp cut outs can be done with a jig saw, band saw or scroll saw, and the hole is best done with the drill press.
Clicking on the link above will open the pdf in a new tab. You can also right-click the link, then choose ‘save as’ or ‘download’ and then save the pdf to your files.